Modified Bitumen (MB) Torch Down Roofing membranes were first developed in Europe in the mid-1960’s, introduced in the U.S. in the late 1970’s, and first manufactured in the U.S. in 1980. The membrane is composed of various types of modifiers, reinforcements, and surface treatments.
The 36 inch-wide membrane rolls can be purchased with or without embedded ceramic granules that protect against harmful UV rays. The unprotected MB membrane will need to be coated with an asphalt-aluminum coating, known as Silver Coating, for harmful UV protection.
Torch down roofing using MB can be installed as single ply, or a 2 ply membrane, on both commercial and residential buildings. When installed as a 2 ply system, we provide a 40-year warranty.
Torching down a Modified Bitumen 2 ply membrane requires little surface preparation. A 2 ply torch down membrane can be installed over any existing roof or surface, to include a Hot-Tar-and-Gravel roof system. To install this 2 ply system, a fiber asphalt base is fastened with anchors and washer plates, to the existing roof, or to a substrate. This is followed by a self-adhering modified bitumen rubber base. Then a Modified Bitumen membrane, embedded with ceramic granules, is heat fused down to the base, completing the 2 ply system. The combination of these layers makes the membrane over 3/8″ thick. This roof system can withstand heavy foot traffic by work crews, snow shoveling, and because it has embedded ceramic granules on the surface, it will be protected from harmful UV rays.
The 2 Ply MB Torch Down Roofing Membrane is 3/8″ thick and can be installed directly over an uneven stone surface without being compromised by punctures. In fact, the stone layer provides excellent insulation, when air is trapped between that layer and the new MB membrane. MB can also be installed over EPDM and TPO roofing systems that have degraded due to the lack of UV protection and the failures of bonding adhesives on seams. Because these existing roofing systems can be covered with the 2 Ply MB, stripping and removing the existing roof debris will not be an expense.
Torch down 2 ply rubber roofs are durable in that, not only can they withstand at least 40 years of extreme weather conditions, they can remain unaffected with heavy foot traffic by service and repairmen, as well. Unlike the single ply roofing systems, as in TPO and EPDM, the 2 ply MB system will need little to no maintenance during its life.
Installing the Torch Down Modified Bitumen 2 Ply Rubber Roofing requires a contractor to have the following:
We have been repairing leaky skylights over 30 years We have tried many types of products…
Leak Repairs on Flat Roofs This image explains about seams on a Torch Down Roof…
EPDM & Modified Bitumen Torch Down Rubber Roofs – Which is the Best? Leave a…
Sven Ferreira – Roofing Contractor Norwalk CT My Roofing Experience. My roofing experience began at…
Andre Ferreira – Roofing Contractor in Norwalk CT A little about myself. At the age…
Naas Ferreira – Roofing Contractor and Consultant I started his roofing business in 1997. Then,…